[cisco-voip] How to check for QoS?

[Weigand, John V.]

http://www.medicineforthedefense.com/
I've been tasked with checking to see if our VAR ever setup any QoS at
all, and if so, what type and how it's set. Unfortunately, although I've
become fairly proficient at CallManager itself, I'm pretty new to the
inner workings of everything at the actual network level.

 

I know there's a few different ways to set it all up, and I've tried
poking around, but I'm not really even sure where to begin looking. Does
anyone have any pointers as to how I might be able to track down some of
this info? Is there anything I can tell from a packet capture of a call
from between two of our sites? I do also have read only access to the
switches/routers on the network. 

 

Thanks in advance!


John V. Weigand
Help Desk Support/Executive Support

Litigation Management, Inc.
300 Allen-Bradley Drive
Suite 200
Mayfield Heights, OH 44124




Tel: 440-484-2000
Fax: 440-484-2009
Cell: 
email: mailto:jvw at medicineforthedefense.com 

PRIVILEGE AND CONFIDENTIALITY NOTICE 

The information in this electronic mail is intended for the named recipients only. It may contain privileged and confidential material and may be protected under law by the Health Insurance Portability and Accountability Act. Any use of this information by anyone other than the intended receiver is prohibited. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by replying to this electronic e-mail or by calling (800) 778-5424. Please delete it from your computer. Thank you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090105/58435876/attachment.html>