[cisco-voip] Hwic-3G-GSM

[Wes Sisk]

I have not been able to play with one yet, but my understanding is  
they are more of a data card, similar to a serial link or data t1.   
you would route IP traffic over the interface.  it would not be a TDM  
interface ala t1-pri or t1-cas.

regards,
wes

On Jan 5, 2009, at 5:16 PM, Leslie Meade wrote:

Can these route voice calls ?
I cannot see how to configure a dial peer.
Am I better of creating a link back into my office and set the dial  
peer as a voip and not a pot  and  let me call manager route it ?


Leslie Meade  ccna ccvp
Network Administrator

lmeade at signal.ca
IP Phone :604-453-5076
Mobile     :778-228-4339
Fax          :604-453-5051

Building C - 3500 Cornett Road
Vancouver, BC
V5M 2H5
Canada
www.signal.ca

<image001.jpg>  <image002.jpg>
This e-mail may contain confidential and privileged material for the  
sole use of the intended recipient. Any review, use, distribution or  
disclosure by others is strictly prohibited. If you are not the  
intended recipient (or authorized to receive for the recipient),  
please contact the sender by reply e-mail and delete all copies of  
this message.
P Please consider the environment before printing this email.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090105/2477745e/attachment.html>