[cisco-voip] Translation pattern in CUCM6.1

[Jacky Cai]

Thanks. but the problem is that the calling number is not fixed length and
can not use a mask to drop the first digit.

2009/1/7 Ahmed Elnagar <ahmed_elnagar at hotmail.com>

>
> Provided that the first digit is fixed you could make it on the calling
> party transforamtion on the route pattern or the route list "if using" by
> making a mask to remove first digit only...if the calling number is 90108899
> use a mask of xxxxxx this will result in 0108899 then prefix two digits one
> is the first digit and the second is the one you want to add...so if the
> digit you want to insert is 0...prefix 90 so the number will be 900108899
>
>
> Thanks,
> Ahmed Elnagar
> ------------------------------
> Date: Wed, 7 Jan 2009 12:07:19 +0800
> From: jackycxh at gmail.com
> To: TimothyEstes at spherion.com; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Translation pattern in CUCM6.1
>
>
> Yes. that's the case. but unforturnally I am using MGCP... :-(. Any idea on
> the CUCM side?
>
> Thanks a lot.
>
>   2009/1/7 Jacky Cai <jackycxh at gmail.com>
>
> Yes. that's the case. but unforturnally I am using MGCP... :-(. Any idea on
> the CUCM side?
>
> Thanks a lot.
>
> 2009/1/7 Estes, Timothy <TimothyEstes at spherion.com>
>
>  If you have H.323 gateways the following config will work. Basically if
> the number is in the local area code we translate the calling number to
> 9XXXXXXXXXX. If the number is not in the local area code its becomes
> 91XXXXXXXXXX. This makes the caller ID display on the phone show the correct
> dialable pattern for call-back purposes.
>
> The following basic config on a 323 GW should work for the Ft. Lauderdale
> area where 954 and 754 are the local overlay area codes.
>
>
> voice translation-profile TP1
>  translate calling 1
>
> voice translation-rule 1
>  rule 1 /^\(954[2-9]......\)/ /9\1/
>  rule 2 /^\(754[2-9]......\)/ /9\1/
>  rule 3 /^\([2-9]..[2-9]....../)\ \91\1/
>
> dial-peer voice 101 pots
> description PSTN - PRI
> translation-profile incoming TP1
> direct-inward-dial
> port 0/0/1:23
>
>
>
> Timothy Estes
> Affiliated Computer Services (ACS) @ Spherion
> Ft. Lauderdale FL
> timothyestes at spherion.com
>
>
>
>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [
> cisco-voip-bounces at puck.nether.net] On Behalf Of Jacky Cai [
> jackycxh at gmail.com]
> *Sent:* Tuesday, January 06, 2009 9:57 PM
> *To:* cisco-voip at puck-nether.net List
> *Subject:* [cisco-voip] Translation pattern in CUCM6.1
>
>    Hi,
>
> In CUCM 6.1, do you have any idea on how to add a digit to calling party
> number just after the first digits?
>
> For example: translate the calling party number from 9! to 90!.
>
> Thanks.
>
>
>
>
> ------------------------------
> Get news, entertainment and everything you care about at Live.com. Check
> it out! <http://www.live.com/getstarted.aspx>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090107/9c370a58/attachment.html>