[cisco-voip] CCM working with Nortel

Micah Bennett mbennett at als-xtn.com
Wed Jan 7 15:29:19 EST 2009


I expect that my office is going to get some Nortel equipment as well as
keep my current call manager setup so the connection between the two
will be a short in house run.  We will have users on both in this
location.  The Nortel leg here (TN) will be connected to the main Nortel
leg (MD) via some type of long haul connection (IP or P2P).  Sounds like
its going to be good time for everyone.

Micah Bennett 



  _____  

From: Eric Isakson [mailto:Eisakson at ogdenclinic.com] 
Sent: Wednesday, January 07, 2009 2:24 PM
To: Micah Bennett; Matt Slaga (US)
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CCM working with Nortel

 

If you set both ends up as trunks to the other, not one iota.  As far as
the systems know, they're simply routing calls over those trunks, so
once you have both ends up, route away and you're done.  BTW, and Option
81c is the same as the Option 51c we used, just bigger.

 

Eric Isakson | Network Engineer | Information Technology Dept. | Ogden
Clinic | eric at ogdenclinic.com <mailto:eric at ogdenclinic.com>  |
801.475.3572

 

From: Micah Bennett [mailto:mbennett at als-xtn.com] 
Sent: Wednesday, January 07, 2009 13:20
To: Matt Slaga (US); Eric Isakson
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CCM working with Nortel

 

No idea at this point.  The Cisco is currently mine and our new sister
company has Nortel.

 

Our call manager version is 4.2(3).  I believe they have Nortel 81C.

 

Do different versions of one system care about different versions of the
other?

Micah Bennett 
Telecommunications Admin 
Automated License Systems 
3055 Lebanon Rd, Ste 2301 
Nashville, TN  37214 
Extension: 2357 
Office: 615-263-4066 
Mobile: 615-207-0318 
Email: micah.bennett at als-xtn.com <mailto:micah.bennett at als-xtn.com>  
Website: www.als-xtn.com <http://www.als-xtn.com>  

  _____  

From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com] 
Sent: Wednesday, January 07, 2009 1:53 PM
To: Micah Bennett; Eric Isakson
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CCM working with Nortel

 

If your Nortel is licensed for Q.Sig, I would recommend that route.  

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Micah Bennett
Sent: Wednesday, January 07, 2009 2:51 PM
To: Eric Isakson
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CCM working with Nortel

 

Ah, the DMS100.   I have not thought about that in a while.  It takes me
back to my previous life as a wireless engineer for Nextel. 

 

Anyway, thanks.  It sounds like its not going to be a problem.  

 

Micah Bennett 
Telecommunications Admin 

  _____  

From: Eric Isakson [mailto:Eisakson at ogdenclinic.com] 
Sent: Wednesday, January 07, 2009 1:47 PM
To: Micah Bennett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CCM working with Nortel

 

We did it here a few years ago with a Nortel Option 51c using a PtP PRI
and translation and route patterns on both sides.  We used a 2821, MGCP,
and, IIRC, we had to tell the 2821 it was talking to a DMS100.  Sorry I
don't have more information, it was a while ago and my memory fails me.

 

Eric Isakson | Network Engineer | Information Technology Dept. | Ogden
Clinic | eric at ogdenclinic.com <mailto:eric at ogdenclinic.com>  |
801.475.3572

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Leetun, Rob
Sent: Wednesday, January 07, 2009 12:40
To: Micah Bennett; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CCM working with Nortel

 

We have done it here, which we use MGCP.  This was done 5 years ago and
never have switched to H.323.  Our vendor ISC has done it with H.323
recently.  Maybe Brad could give you some tips?

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Micah Bennett
Sent: Wednesday, January 07, 2009 12:33 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM working with Nortel

 

Hello all

I have been tasked with see what the options are to link some systems
(Cisco Call Manager and Nortel) together so we can dial across each one
to the other for office extensions and such. 

I know this is a broad question, but can it be done ( I think so ) and
what type of stuff is needed to accomplish it.

If anyone has a broad overview that would be great.

Micah Bennett

 

 

 

  _____  

This email is confidential and may be legally privileged. It is intended
solely for the addressee.  Access to this email by anyone else, unless
expressly approved by the sender or an authorized addressee, is
unauthorized. If you are not the intended recipient, any disclosure,
copying, distribution or any action omitted or taken in reliance on it,
is prohibited and may be unlawful.  If you believe that you have
received this email in error, please contact the sender, delete this
email, and destroy all copies. 

  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090107/bc5723ab/attachment.html>


More information about the cisco-voip mailing list