[cisco-voip] Cisco 1861 caller-id

[Jason Aarons (US)]

Can you provide more details? IOS version, CallManager version, type of
gateway (ISDN, FXO), model phone and load.  In general calling party
number should work fine with CallManager. Debug isdn q931 or debug voip
ccapi and look at ccm traces.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dean Wright
Sent: Thursday, January 08, 2009 11:33 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco 1861 caller-id

 

I finally got the caller id to work or so I thought I set all required
information and dialled in from my mobile and it worked

 

Then I hung up and tried again and DOH it doesn't work!!!! Now what I
noticed if it helps 

 

when it work on the first go there was only 2 rings before ringing my
desk phone on the second go its three rings before it hits my desk
phone!!!!

 

So I went though checking all settings then tried again and reproduced
the above!!! Worked on first go and not after

 

Has anyone see this before

 

Many thanks

 

Deano




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090108/9ca55c81/attachment.html>