[cisco-voip] Cisco 1861 caller-id

[Scott Voll]

you don't have a round robin of POTS lines right?  Maybe it works on one and
not the other?

Scott

On Thu, Jan 8, 2009 at 8:33 AM, Dean Wright <Dean.Wright at sysservers.co.uk>wrote:

>  I finally got the caller id to work or so I thought I set all required
> information and dialled in from my mobile and it worked
>
>
>
> Then I hung up and tried again and DOH it doesn't work!!!! Now what I
> noticed if it helps
>
>
>
> when it work on the first go there was only 2 rings before ringing my desk
> phone on the second go its three rings before it hits my desk phone!!!!
>
>
>
> So I went though checking all settings then tried again and reproduced the
> above!!! Worked on first go and not after
>
>
>
> Has anyone see this before
>
>
>
> Many thanks
>
>
>
> Deano
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090108/9c2ebb72/attachment.html>