[cisco-voip] PLAR using alerting name

Melvin Fong mfong at pacific.edu
Mon Jan 12 09:51:21 EST 2009


We have analog lines that we are trying to use as PLAR circuits.  When
we dial from the line we get the alerting name, when PLAR is used it is
putting out the 10 digit number (area code + 7 digits).  This is
happening on our VG224's, we haven't tested our ATA's and VG248's yet.

Any suggestions as to what is causing this would be appreciated.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090112/f5241ba1/attachment.html>


More information about the cisco-voip mailing list