[cisco-voip] Adding second CUCM7 node in VMware? - problems with NTP sync

[Stephen Greszczyszyn]

Hi,

I have successfully built a CUCM7 first node (publisher) in VMware Server
(Linux) with the following configuration:
Static IP/network info, no NTP, no SMTP, no DNS.

I am now trying to add a second node (subscriber) to the cluster (same
VMware, same bridged network), and I keep getting an installation failure
when the second node tries to synchronize with the NTP server on the first
node.  The second node passes the first part of the installation, and then
reboots and continues installation until the NTP sync part where it fails.

On the first node I have tried all types of installation configurations
(using NTP, DNS) and I have verified network connectivity between the first
node and second node (ping) using the CLI.  I have also changed the first
node config from hostname to IP address and added the second node under
ccmadmin->system->server before starting the second node installation.

Has anyone experienced this or can tell me what I'm missing?

Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090113/89a7e6d7/attachment.html>