[cisco-voip] Adding second CUCM7 node in VMware? - problems with NTP sync

[Wes Sisk]

Apologies, this information was a bit preliminary and version 
dependent.  please disregard. /wes

On Tuesday, January 13, 2009 9:29:59 AM, Wes Sisk <wsisk at cisco.com> wrote:
> NTP will be disabled on vmware.
>
> vmware not officially supported platform.
>
> /wes
>
> On Tuesday, January 13, 2009 9:10:45 AM, Stephen Greszczyszyn 
> <sgreszcz at gmail.com> wrote:
>> Hi,
>>
>> I have successfully built a CUCM7 first node (publisher) in VMware 
>> Server (Linux) with the following configuration:
>> Static IP/network info, no NTP, no SMTP, no DNS.
>>
>> I am now trying to add a second node (subscriber) to the cluster 
>> (same VMware, same bridged network), and I keep getting an 
>> installation failure when the second node tries to synchronize with 
>> the NTP server on the first node.  The second node passes the first 
>> part of the installation, and then reboots and continues installation 
>> until the NTP sync part where it fails.
>>
>> On the first node I have tried all types of installation 
>> configurations (using NTP, DNS) and I have verified network 
>> connectivity between the first node and second node (ping) using the 
>> CLI.  I have also changed the first node config from hostname to IP 
>> address and added the second node under ccmadmin->system->server 
>> before starting the second node installation.
>>
>> Has anyone experienced this or can tell me what I'm missing?
>>
>> Thanks.
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>   
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090113/3fc7aae5/attachment.html>