[cisco-voip] SRST Question

[Tor-Ivar Kristoffersen]

Hi

I have setup a Cisco 2801 with 12.4.22T as a SRST router (or that will say, I tried to )
We had a lab env with a 12.4.7 I think on the same router and that worked fine, now I have upgradet to CCM 6.1 and I upgraded the router to 12.4.22T and now I can't get anything to work :)

It seems like the SRST config is different, also I must say at once that I am not very skilled in VOIP config in routers, so bare with me.

What I want to accomplish is having a Cisco 2801 with 2FXS ports for analog Faxes and one ISDN port for dial backup into the corporate network where the CUCM is located.
If anyone has a similar setup or know of any guides that use 12.4.22 (SRST 4.2 I think) I would very much appreciate that.

Also could it be so simple that SRST 4-2 need CUCM 7 (Docs I have seen says 6.x or 7) but you never know

Best regard
Tor-Ivar Kristoffersen
Lufttransport AS





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090114/ebbb09a7/attachment.html>