[cisco-voip] CallerID H323 IOS 12.4(22)

[Scott Voll]

David--

you said 12.4.22...... is this T or not.  My understanding to get it native
(without TCL script) you have to have a minimum of 12.4.20T.  main line
would not cover that(at least that is my understanding).

Scott

On Wed, Jan 14, 2009 at 5:33 AM, David Zhars <dzhars at gmail.com> wrote:

> Hi All.
>
> reconfigured my main VGW to H323.  I found a link which says you can now
> get the name and number from CallerID with
> H323, as long as you have version 12.4.
>
> Yet when people call in on the ISDN line, they are just getting the number
> and no name.
>
> Relevant config portion:
>
> voice class h323 1
>   h225 timeout tcp establish 3
>  h225 display-ie ccm-compatible  (this is supposed to be the magic line!)
>
> controller T1 0/1/0
>  pri-group timeslots 9-24
>
> interface Serial0/1/0:23
>  no ip address
>  encapsulation hdlc
>  isdn switch-type primary-ni
>  isdn incoming-voice voice
>  no cdp enable
>
> no ccm-manager fax protocol cisco
> !
> no mgcp package-capability res-package
> no mgcp package-capability fxr-package
> no mgcp timer receive-rtcp
>
> num-exp 8812 1752
>
> Now, the number I am testing with is 555-8812.  Which when it comes in, we
> convert it to 1752 and CCM pushes that to 1712.
> Is it possible with all the number translating and routing I am losing the
> Caller ID name?  Or is this just a pipe dream and the only way
> to get Caller ID Name is with MGCP?
>
> Thanks anyone!
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090114/8cc07fa9/attachment.html>