[cisco-voip] trace settings for appliances

[Lelio Fulgenzi]

We've typically left trace set to arbitrary on our CCM 4.1 servers so we can actually find them useful, otherwise, if we have to set it after the fact, we can't find the problem. 

We have had no problem whatsoever, likely do to the size of the servers and the load, we're using 7845s with about 1500 phones registered to each server. 

Anyone have any experience leaving the trace settings on arbitrary on the appliances? I know that you need to use RTMT to collect things, but I'm wondering if the server itself stores them for a while as well. Obviously downloading them causes some strain, but again, they're not busy. 

Thoughts? 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090114/aab49192/attachment.html>