[cisco-voip] Issue with 7945 phones and Display Name

[Randy Homyk]

ASCII Display Name must be part of your bat file.  Even though it auto
populates when adding a phone manually,  it does NOT do this when adding
phones via BAT.

 

ASCII Display Name is the name that shows up when a users phone is ringing.
If not populated, only the phone number will appear.

 

Randy Homyk

CCIE Voice #14584

Homyk Systems

mailto:  rhomyk at homyk.net

mailto:  rhomyk at bellsouth.net

Phone: +786-269-5175

Fax: +305-258-9156

Mobile: 786-269-5175

www.homyk.net <http://www.homyk.net/> 

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Buchanan
Sent: Wednesday, January 14, 2009 6:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Issue with 7945 phones and Display Name

 

Hello,

 

I have 7945 phones deployed with CallManager 5.1(3). When the phones were
imported, the Display Name was set on the lines but the ASCII Display Name
was not. When these phones call phones at another location, only the
extension shows up for caller ID. The Display Name does not show up. If the
ASCII Display Name is populated, then the Display Name shows up properly.
Any thoughts on why this is the case?

 

Thanks,

 

James Buchanan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090114/987f71a8/attachment.html>