[cisco-voip] PRI usage SNMP

[Norton, Mike]

Thanks Afatsum.

 

I followed CSCsh50451's advice and created a dial-peer for the port in
question. Now instead of zero, the OID gives me totally meaningless
numbers. At least the meaningless number increases and decreases
according to channel utilization; that's a start, I guess. The IOS is
fairly dated; I'll try a newer one at next maintenance window.

 

-- 

Mike Norton

I.T. Support

Peace Wapiti School Division No. 76

Helpdesk: 780-831-3080

Direct: 780-831-3076

 

 

From: Afatsum [mailto:afatsum at verizon.net] 
Sent: January-16-09 12:37 PM
To: Norton, Mike; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] PRI usage SNMP

 

I dug out my old TAC case email and seems like you might have the same
issue. Below is the TAC case response I had. The case was open for 3745
back in June 2007. The 3745 in case was in production for two years
already and running older version of IOS. I was able to poll 3825 and
get proper repsonse from them and they were running much recent version
of IOS. So I believe the bug might have been fixed in later version
release. But I didn't pursue it much since we only had one 3745 and no
one was interested in upgrading IOS.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090116/dca15296/attachment.html>