[cisco-voip] Two welcome message on call manager7.0

[Lelio Fulgenzi]

Yes, that's not a problem. For example, with MGCP you would simply create a translation pattern. With H323 you would create a PLAR configuration. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Ahmad Alkam" <alkam.ahmad at yahoo.com> 
To: cisco-voip at puck.nether.net 
Sent: Tuesday, January 20, 2009 4:34:50 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Two welcome message on call manager7.0 



Dears, 

I have call manager 7,0 and one E1 (30 channels) connected to cisco 2801 voice gateway, can i run two welcome message on this call messanger. 
for example: when i dial 222222 from PSTN i get welcome message 1. 
and when call 222221 from PSTN i get welcome message 2. 

Thansk, 
Ahmad 

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090120/b1a9cb95/attachment.html>