[cisco-voip] UCM 6 Replace Server Names with IPs

[Turpin, Mark]

None.  Just make sure you change the parameters for urls for things like services, too.

--

MARK TURPIN  |  Systems Engineer  |  CCIE 21649 |  Insight Networking Solutions  | www.calence.com  
t. 314.656.2315   c. 314.277.7948   f. 314.656.2355  mark.turpin at insight.com 
 
The information contained in this message and any attachment may contain privileged or confidential information protected from disclosure. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any review, dissemination, distribution or copying of this information is strictly prohibited.  If you have received this transmission in error, please notify the sender immediately by replying to this message and destroying the original and all copies.  Thank you.



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Brown
Sent: Thursday, January 22, 2009 5:08 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] UCM 6 Replace Server Names with IPs

We accidentally configured hostnames under the System -> Servers page on 
  UCM 6.1.2.

The upshot of this is that the MGCP auto-config writes hostnames out to 
the IOS routers.

This behaviour is described in the following post:

http://www.gossamer-threads.com/lists/cisco/voip/89377?search_string=mgcp%20hostname;#89377

We don't want to run DNS or configure static 'ip hosts' on these 
routers, so the preferred option is to replace the server hostnames with 
IP addresses.

Does anyone know what impact (to replication etc.) replacing the 
hostnames with IP addresses under System->Servers would have please?

Regards

James.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip