[cisco-voip] Conversion from Centrex to VoIP

[Curtis, Adam]

Lisa,
If you create a new partition, a new calling search space and add these new phones to it you should be able to isolate them from all the other VOIP phones. When you are ready to deploy you can do a bulk update on the phones to change their CSS.

Adam Curtis
Pizzagalli Construction Company
IT Support Technician
(802) 651-1319

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lisa Notarianni
Sent: Friday, January 30, 2009 11:13 AM
Cc: cisco-voip at puck.nether.net
Subject: [cisco-voip] Conversion from Centrex to VoIP

I asked this question before but did not get a response from anyone.  I am going to reword it...

We are in the process of switching from Centrex to VoIP.  As we move along and convert each department, we find timing difficult because as soon as the phones are entered in Call Manager, those already on VoIP calling the lines on that phone get an error since the phone is not yet plugged in.

In addition to having convert the lines from Centrex to our DID block (I can work around that), we find it difficult to come up with a solution with being able to work ahead of schedule by adding the phones into Call Manager without having calling issues from VoIP phones.

Anyone know of a creative way to add these phones to Call Manager but isolate them from other VoIP phones until we are ready to deploy them to desks?

Thanks,

Lisa


[cid:image001.gif at 01C982CC.841556A0]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090130/f961dc45/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 11474 bytes
Desc: image001.gif
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090130/f961dc45/attachment.gif>