[cisco-voip] Dialogic SR140 / Call Manager / Trunk / Calling Search Space

[Cristobal Priego]

you can try to create a unique CSS for the Trunk and assign only the
partition of those inbounds extensions
2009/7/1 Bob Fronk <bob at btrfronk.com>

>  Yes, Inbound.
>
>
>
> Yes, the PRIs are in different partitions.
>
>
>
> *--*
>
> *Bob Fronk*
>
> P Please print only as needed.
>
>
>
>
>
>
>
>
>
>
>
> *From:* Cristobal Priego [mailto:cristobalpriego at gmail.com]
> *Sent:* Wednesday, July 01, 2009 12:42 PM
> *To:* Bob Fronk
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Dialogic SR140 / Call Manager / Trunk /
> Calling Search Space
>
>
>
> Do you have Different Partitions associated to those DIDs on the remote
> sites?
>
> I think of a unique CSS that only has the Partitions of the DIDs of sites,
> no CSS for outgoing calls, this is only for inbound, corrrect?
> '
> Cris
>
> 2009/7/1 Bob Fronk <bob at btrfronk.com>
>
> Good morning,
>
>
>
> I hope there is someone on the list that has seen a similar setup and has a
> suggestion.  I am a Call Manger newbie, so I will try my best to explain.
>
>
>
> Call Manager 6.1.2.1000-13
>
> Dialogic (BrookTrout) SR140 with 8 channels (Interface for Call Manager to
> Fax software)
>
> Esker Fax Server
>
>
>
>
>
> This is a new installation of the Dialogic / Esker combo.  CUCM
> communicates with the Dialogic software via a Trunk.  The trunk has the
> calling search space and points to the IP of the Dialogic/Fax server.  Route
> patterns send incoming calls (DID numbers) to the fax board or to the
> Gateway for outgoing calls.  This works for a SINGLE calling search space.
>
>
>
> The problem I have is that I have multiple PRI(s) at different sites, with
> different area codes.  The issue is since there the Trunk has a single
> calling search space, it cannot route calls coming from / to the other
> PRI(s) so that users at those sites can receive faxes on their local DID
> numbers and have to send faxes as long distance calls instead of via the
> local PRI.
>
>
>
> I have tried setting up second trunk with the CSS of one of the other
> sites, but this does not seem to work.  The call appears to loop once then
> fail (Q931 debug).
>
>
>
> Dialogic and Esker say this is a Cisco issue, so they are unable to provide
> assistance.
>
>
>
> Ideas from the group?
>
>
>
> Thanks.
>
>
>
>
>
>
>
> *--*
>
> *Bob Fronk*
>
> P Please print only as needed.
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090701/ea97d68f/attachment.html>