[cisco-voip] Cisco 2801 - PRI

[Jeffrey S. McNeal]

Hello All,
 
I am trying to configure a pri on a cisco 2801 but I get the following message:
 
(config-controller)#pri-group timeslots 1-24
% Not enough DSP resources available to configure pri-group on controller T1 0/1
/1
% The remaining dsp resources are enough for 4 time slots.
% For current codec complexity, 2 extra dsp(s) are required to create this voice
 port.
 
Can I fix it or is something wrong?
 
 
Jeffrey S. McNeal
Vision Technology Group, LLC
125 West Bruce Street
Harrisonburg, VA 22801
(540) 437-0112 - Office
(540) 437-0129 - Fax
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090701/4cdffcb8/attachment.html>