[cisco-voip] Cisco Unified Servers connection to VSS switch

[Shine Joseph]

Hi,

Thanks for the wuick response.

That means, I cannot conenct the two nics from the MCS to a VSS. I can use only one NIC to the switch and no port channel. Is taht correct?

Thanks,


  ----- Original Message ----- 
  From: Voice Noob 
  To: 'Shine Joseph' ; cisco-voip at puck.nether.net 
  Sent: Wednesday, July 08, 2009 5:01 AM
  Subject: RE: [cisco-voip] Cisco Unified Servers connection to VSS switch


  I don't think you would. It is not supported..YET J

   

   

  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Shine Joseph
  Sent: Tuesday, July 07, 2009 3:57 PM
  To: cisco-voip at puck.nether.net
  Subject: [cisco-voip] Cisco Unified Servers connection to VSS switch

   

  Hi,

   

  I am wondering how would one connect CUCM/CUC/CUPS servers to a VSS switch, where a port channel is configured and in MCS you have only NIC failover.

   

  I have searched the archive and couldn't find any references.

   

  Any pointers are welcome.

   

  Thanks in advance,

  Shine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090708/0f82fbbc/attachment.html>