[cisco-voip] Cisco Unified Servers connection to VSS switch

[Shine Joseph]

Sorry. Should have been more specific.
I am refering to 2 x 6500s. Virtual Switching System.

Thanks
  ----- Original Message ----- 
  From: Voice Noob 
  To: 'Shine Joseph' ; cisco-voip at puck.nether.net 
  Sent: Wednesday, July 08, 2009 5:22 AM
  Subject: RE: [cisco-voip] Cisco Unified Servers connection to VSS switch


  Is VSS the virtual switch inside Vmware? Or are you talking about two 6500's connected together? 

   

  From: Shine Joseph [mailto:shinejoseph at dodo.com.au] 
  Sent: Tuesday, July 07, 2009 4:20 PM
  To: Voice Noob; cisco-voip at puck.nether.net
  Subject: Re: [cisco-voip] Cisco Unified Servers connection to VSS switch

   

  Hi,

   

  Thanks for the wuick response.

   

  That means, I cannot conenct the two nics from the MCS to a VSS. I can use only one NIC to the switch and no port channel. Is taht correct?

   

  Thanks,

   

   

    ----- Original Message ----- 

    From: Voice Noob 

    To: 'Shine Joseph' ; cisco-voip at puck.nether.net 

    Sent: Wednesday, July 08, 2009 5:01 AM

    Subject: RE: [cisco-voip] Cisco Unified Servers connection to VSS switch

     

    I don't think you would. It is not supported..YET J

     

     

    From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Shine Joseph
    Sent: Tuesday, July 07, 2009 3:57 PM
    To: cisco-voip at puck.nether.net
    Subject: [cisco-voip] Cisco Unified Servers connection to VSS switch

     

    Hi,

     

    I am wondering how would one connect CUCM/CUC/CUPS servers to a VSS switch, where a port channel is configured and in MCS you have only NIC failover.

     

    I have searched the archive and couldn't find any references.

     

    Any pointers are welcome.

     

    Thanks in advance,

    Shine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090708/56d366da/attachment.html>