[cisco-voip] R2 incoming call problem
Marcelo Zilio
ziliomarcelo at gmail.com
Wed Jul 8 10:29:41 EDT 2009
Maybe you should configure CAS options
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800942f2.shtml
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008024903b.shtml
2009/7/8 zibouche abdenour <abdenour at procom.dz>
> hello
>
> We have a problem, we have an AS5350 which works perfectly with H323->E1
> but when we need to make calls in the reverse sens E1 to H323 it don't
> works.
>
> E1 signaling is with R2.
>
> Bellow is the configuration.
>
> show run
>
> show version
>
> debug output pour
>
> (
> debug cas
>
> debug sigsm r2
>
> debug modem
>
> debug call-mgmt
>
> debug calltracker
>
> debug csm modem
>
> debug spe sm
>
> debug ppp nego
>
> debug ppp authen
>
> debug dialer
>
> debug ppp error
>
> debug radius authentication
>
> debug radius accounting
>
> debug radius
>
> debug sigsm api
>
> debug nextport ssm detail
>
> debug nextport siglib detail
> )
>
>
>
> ********************************************************************************
> show run conf
>
> ********************************************************************************
> resource-pool disable
> tdm clock priority 1 3/1
> tdm clock priority 2 3/0
> spe default-firmware spe-firmware-1
> aaa new-model
> !
> !
> aaa group server radius procom
> server xxx.xxx.xxx.xxx auth-port 1812 acct-port 1813
> server xxx.xxx.xxx.xxx auth-port 1812 acct-port 1813
> !
> aaa authentication login default local
> aaa authentication login h323 group procom
> aaa authorization exec h323 group radius
> aaa authorization network h323 group radius
> aaa accounting network default start-stop group radius
> aaa accounting connection default start-stop group radius
> aaa accounting connection h323 start-stop group procom
> aaa accounting system default start-stop group AIP
> aaa session-id common
> ip subnet-zero
> ip cef
> no ip domain lookup
> !
> isdn switch-type primary-ni
> !
> voice call send-alert
> voice rtp send-recv
> !
> voice service voip
> fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none
> h323
> session transport tcp calls-per-connection 1
> !
> voice class codec 1
> codec preference 1 g723r53 bytes 100
> codec preference 2 g723r63 bytes 96
> codec preference 3 g729r8
> codec preference 4 g729br8
> !
> !
> !
> voice class h323 1
> !
> !
> !
> !
> !
> no voice hpi capture buffer
> no voice hpi capture destination
> !
> !
> !
> fax interface-type fax-mail
> mta receive maximum-recipients 0
> call-history-mib retain-timer 300
> call-history-mib max-size 500
> !
> !
> !
> controller E1 3/0
> framing NO-CRC4
> ds0-group 2 timeslots 1-15,17-31 type r2-digital r2-compelled
> description Digital-Path#530
> !
> controller E1 3/1
> framing NO-CRC4
> ds0-group 2 timeslots 1-15,17-31 type r2-digital r2-compelled
> description Digital-Path#531
> gw-accounting aaa
> !
> !
> !
> interface Loopback0
> no ip address
> !
> interface FastEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface FastEthernet0/1
> ip address 10.1.1.12 255.255.255.0 secondary
> duplex half
> speed auto
> !
> interface Serial0/0
> no ip address
> shutdown
> clockrate 2000000
> !
> interface Serial0/1
> no ip address
> shutdown
> clockrate 2000000
> !
> interface Group-Async0
> no ip address
> group-range 1/00 1/59
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 10.1.1.10
> no ip http server
> !
> !
> !
> access-list 1 permit 192.168.1.0 0.0.0.255
> access-list 1 permit 10.0.0.0 0.255.255.255
> !
> tftp-server flash:c5350-is-mz.122-2.XB8.bin
> tftp-server flash:c5350-is-mz.123-20a.bin
>
> !
> no radius-server attribute nas-port
> radius-server host xxx.xxx.xxx.xxx auth-port 1812 acct-port 1813
> radius-server host xxx.xxx.xxx.xxx auth-port 1812 acct-port 1813
> radius-server retransmit 15
> radius-server timeout 30
> radius-server key 7 08315E4D041B0C1B1E
> radius-server authorization permit missing Service-Type
> radius-server vsa send accounting
> call rsvp-sync
> !
> voice-port 3/1:2
> compand-type a-law
> !
> voice-port 3/0:2
> compand-type a-law
> !
> !
> mgcp profile default
> !
> dial-peer cor custom
> !
> !
> !
> dial-peer voice 66151 pots
> destination-pattern 7135#213T
> progress_ind setup enable 1
> progress_ind progress enable 2
> progress_ind connect enable 2
> direct-inward-dial
> port 3/0:2
> prefix 0
> !
> dial-peer voice 100 pots
> description Incoming From PSTN
> destination-pattern .T
> direct-inward-dial
> port 3/1:2
> !
> dial-peer voice 200 voip
> destination-pattern .T
> progress_ind setup enable 3
> voice-class codec 1
> session target ipv4:213.186.48.146
> dtmf-relay rtp-nte h245-signal h245-alphanumeric
> !
> line con 0
> line aux 0
> line vty 0 4
> privilege level 15
> transport input lat pad telnet rlogin udptn v120 lapb-ta
> line 1/00 1/59
> no flush-at-activation
> modem InOut
> !
> scheduler allocate 10000 400
> end
>
>
> ***************************************************************************************
> show vers
> ***************************************************************************************5300-3#show
> version
> Cisco Internetwork Operating System Software
> IOS (tm) 5350 Software (C5350-IS-M), Version 12.2(15)T14, RELEASE
> SOFTWARE (fc4)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2004 by cisco Systems, Inc.
> Compiled Sat 28-Aug-04 14:33 by cmong
> Image text-base: 0x6000895C, data-base: 0x61600000
>
> ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
> BOOTLDR: 5350 Software (C5350-BOOT-M), Version 12.2(2)XB2, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
>
> 5300-3 uptime is 38 minutes
> System returned to ROM by reload at 13:36:32 UTC Mon Jun 29 2009
> System image file is "flash:c5350-is-mz.122-15.T14.bin"
>
> cisco AS5350 (R7K) processor (revision T) with 131072K/65536K bytes of
> memory.
> Processor board ID JAE07170MZW
> R7000 CPU at 250Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3
> Cache
> Last reset from IOS reload
> Channelized E1, Version 1.0.
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> Primary Rate ISDN software, Version 1.1.
> Manufacture Cookie Info:
> EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x32,
> Board Hardware Version 3.34, Item Number 800-5171-02,
> Board Revision C0, Serial Number JAE07170MZW,
> PLD/ISP Version 2.2, Manufacture Date 25-Apr-2003.
> Processor 0x14, MAC Address 0x0C30821A7A
> Backplane HW Revision 1.0, Flash Type 5V
> 2 FastEthernet/IEEE 802.3 interface(s)
> 6 Serial network interface(s)
> 60 terminal line(s)
> 2 Channelized E1/PRI port(s)
> 512K bytes of non-volatile configuration memory.
> 32768K bytes of processor board System flash (Read/Write)
> 8192K bytes of processor board Boot flash (Read/Write)
>
> Configuration register is 0x2102
>
>
> ***************************************************************************
> debug out put
> ***************************************************************************
> *Jun 24 08:16:36.383: Call mgmt per minute statistics:
> active list length: 0
> history list length: 0
> *Jun 24 08:16:36.383: 0 timeslots active at slot 3, ctrlr 0
> *Jun 24 08:16:36.383: 0 timeslots active at slot 3, ctrlr 1
> *Jun 24 08:17:09.979: from Trunk(3): (1/12): Rx SEIZURE (ABCD=0001)
> *Jun 24 08:17:10.019: CSM-TGRM:csm_rx_cas_event_from_neat(EVENT_DIAL_IN)
> - c(E1 3/1:2:13) call_type=VOICE, dir=INCOMING
> *Jun 24 08:17:10.023: VDEV_ALLOCATE: 1/47 is allocated
> *Jun 24 08:17:10.023: 1.starting digit collect: reset dnis_collected &
> fap_notify
> *Jun 24 08:17:10.023: CSM_RX_CAS_EVENT_FROM_NEAT:(cid002F):
> EVENT_CALL_DIAL_IN at slot 1 and port 47
> *Jun 24 08:17:10.023: CSM_PROC_IDLE: CSM_EVENT_START_DIGIT_COLLECT at
> slot 1, port 47
> *Jun 24 08:17:10.023: CSM DSPLIB(1/47/csm_flags=0x15):
> np_dsplib_prepare_modem
> *Jun 24 08:17:10.023: CID = 155
> *Jun 24 08:17:10.023: NP Session Message Header:
> *Jun 24 08:17:10.023: msg length = 0x0004
> *Jun 24 08:17:10.023: session ID = 0x009B
> *Jun 24 08:17:10.023: msg tag = 0x1000
> *Jun 24 08:17:10.023: msg ID = 0xF104
> *Jun 24 08:17:10.023: SESSION CHANGE SERVICE Command at 0x40FAC830
> *Jun 24 08:17:10.023: template# = 255, load S-Reg = 2, Data Q ID = 0
> *Jun 24 08:17:10.023: svc_id: type = 0x1500, mode = 0x0000
> *Jun 24 08:17:10.023: np_ssm_session_change_service():: count=16
> 0000 00 04 00 9B 10 00 F1 04 15 00 00 00 00 02 FF
> 00 ................
>
> *Jun 24 08:17:10.023: sigsm:(1/47): sig_config API: sigtype=12,
> tonetype=3, collect=2, r2_info=valid, incoming=TRUE
> *Jun 24 08:17:10.023: variables[0]=3000
> *Jun 24 08:17:10.023: variables[1]=1646985216
> *Jun 24 08:17:10.023: variables[2]=24
> *Jun 24 08:17:10.023: variables[3]=1652662480
> *Jun 24 08:17:10.023: variables[4]=1612077804
> *Jun 24 08:17:10.023: sigsm:(1/47): Using signalling template: 'SrnW'
> *Jun 24 08:17:10.023: sigif_config: end2end=0
> *Jun 24 08:17:10.023: sigsm:(1/47):SIG_STATE_START: Received event
> 'SIG_EVENT_ENTERED'
> *Jun 24 08:17:10.023: csm_connect_pri_vdev: TS allocated at bp_stream 0,
> bp_Ch 48, vdev_common 0x634AF588 1/47
> *Jun 24 08:17:10.023: Response sent through Callback (Port 1/47)
> *Jun 24 08:17:10.027: np_ssm_session_setup_complete_rsp():NP_Address:
> slot 1 dfc 0 module 1 spe 255
> *Jun 24 08:17:10.027: msg length = 0x0016
> *Jun 24 08:17:10.027: session ID = 0x009B
> *Jun 24 08:17:10.027: msg tag = 0x1000
> *Jun 24 08:17:10.027: msg ID = 0xF180
> *Jun 24 08:17:10.027: np_ssm_session_setup_complete_rsp():(1/47)
> *Jun 24 08:17:10.027: (1/47)Setup Result code = 0x00
> *Jun 24 08:17:10.027: Setup TDM stream/channel = 0x00/0x11
> *Jun 24 08:17:10.027: np_ssm_update_vdev_tdm_info():(1/47) st= 1, ch= 17
> *Jun 24 08:17:10.047: np_ssm_session_state_reached_ntf():(1/47)
> *Jun 24 08:17:10.047: svc_type = 0x1500 svc_mode = 0 session_state =
> IDLE
> *Jun 24 08:17:10.047: CSM DSPLIB(1/47):DSPLIB_SIG_INIT: Signaling
> session transition to IDLE
> *Jun 24 08:17:10.047: CID = 155
> *Jun 24 08:17:10.047: CID = 155
> *Jun 24 08:17:10.047: NP Session Message Header:
> *Jun 24 08:17:10.047: msg length = 0x0006
> *Jun 24 08:17:10.047: session ID = 0x009B
> *Jun 24 08:17:10.047: msg tag = 0x1000
> *Jun 24 08:17:10.047: msg ID = 0xF201
> *Jun 24 08:17:10.047: ===>> Set Running Param Command
> *Jun 24 08:17:10.047: =====>> Num of Params: 3
> *Jun 24 08:17:10.047: =======>>>>> Parameter(0): ID= 0x8001, Value=
> 0x0000
> *Jun 24 08:17:10.047: =======>>>>> Parameter(1): ID= 0x0000, Value=
> 0x0003
> *Jun 24 08:17:10.051: =======>>>>> Parameter(2): ID= 0x0002, Value=
> 0x0001
> *Jun 24 08:17:10.051: np_ssm_service_set_running_params():: count=24
> 0000 00 06 00 9B 10 00 F2 01 00 03 00 00 80 01 00
> 00 ................
> 0010 00 00 00 03 00 02 00 01 ........
>
> *Jun 24 08:17:10.051: np_ssm_session_start():(1/47) Sending Command Msg
> *Jun 24 08:17:10.051: CID = 155
> *Jun 24 08:17:10.051: NP Session Message Header:
> *Jun 24 08:17:10.051: msg length = 0x0002
> *Jun 24 08:17:10.051: session ID = 0x009B
> *Jun 24 08:17:10.051: msg tag = 0x1000
> *Jun 24 08:17:10.051: msg ID = 0xF102
> *Jun 24 08:17:10.051: SESSION START Command at 0x4103502C
> *Jun 24 08:17:10.051: np_ssm_session_start():: count=8
> 0000 00 02 00 9B 10 00 F1 02 ........
>
> *Jun 24 08:17:10.055: np_ssm_session_start_rsp():(1/47)
> *Jun 24 08:17:10.055: Session Start Rsp result code = 0x0000
> *Jun 24 08:17:10.063: np_ssm_session_state_reached_ntf():(1/47)
> *Jun 24 08:17:10.063: svc_type = 0x1500 svc_mode = 0 session_state =
> ACTIVE
> *Jun 24 08:17:10.063: CSM DSPLIB(1/47):DSPLIB_SIG_WAIT_ACTIVE: Signaling
> session transition to ACTIVE
> *Jun 24 08:17:10.063: sigsm:(1/47): sig_start API.
> *Jun 24 08:17:10.063: sigsm:(1/47):SIG_STATE_START: Received event
> 'SIG_EVENT_START'
> *Jun 24 08:17:10.063: sigsm:(1/47):SIG_STATE_R2: Received event
> 'SIG_EVENT_ENTERED'
> *Jun 24 08:17:10.063: sigsm:R2: INCOMING IDLE Got START
> *Jun 24 08:17:10.063: sigsm:R2: sig_r2_in_initialize
> *Jun 24 08:17:10.063: sigsm:R2: sig_r2_send_digit digit 16
> *Jun 24 08:17:10.063: sigsm:(1/47):SIG_STATE_R2: stopping R2 continuous
> tone
> *Jun 24 08:17:10.063: np_siglib_send_stop_digits_cmd():: count=8
> 0000 80 02 00 9B 00 00 15 01 ........
>
> *Jun 24 08:17:10.063: CSM DSPLIB(1/47): Modem went offhook
> *Jun 24 08:17:10.063: CSM_PROC_IC1_COLLECT_ADDR_INFO:
> CSM_EVENT_MODEM_OFFHOOK (DNIS=, ANI=) at slot 1, port 47
> *Jun 24 08:17:10.063: CSM to NEAT:(002F) EVENT_CHANNEL_LOCK for slot 3
> ctlr 1 chan 12
> *Jun 24 08:17:10.067: CSM to NEAT:(002F) EVENT_VOICE_ANS for slot 3 ctlr
> 1 chan 12
> *Jun 24 08:17:10.071: np_siglib_dispatch_rsp(), NP_Address: slot 1 dfc 0
> module 1 spe 255
> *Jun 24 08:17:10.071: np_siglib_dispatch_rsp(): count=12
> 0000 00 03 00 9B 00 00 15 FE 15 01 00 00 ............
>
> *Jun 24 08:17:10.071: np_siglib_ack_rsp():, NP_Address: slot 1 dfc 0
> module 1 spe 255
> *Jun 24 08:17:10.071: sigsm:(1/47):SIG_STATE_R2: sig_digits_generated
> API: success=TRUE
> *Jun 24 08:17:10.071: sigsm:(1/47):SIG_STATE_R2: Received event
> 'SIG_EVENT_DIGITS_GENERATED'
> *Jun 24 08:17:10.123: CSM_RX_CAS_EVENT_FROM_NEAT:(002F):
> EVENT_START_RX_TONE at slot 1 and port 47
> *Jun 24 08:17:10.123: from Trunk(3): (1/12): Tx SEIZURE_ACK (ABCD=1101)
> *Jun 24 08:17:11.647: from Trunk(3): (1/12): Rx IDLE (ABCD=1001)
> *Jun 24 08:17:11.731: from Trunk(3): (1/12): Tx IDLE (ABCD=1001)
> *Jun 24 08:17:12.131:
> CSM-TGRM:csm_rx_cas_event_from_neat:EVENT_CALL_IDLE - c(E1 3/1:2:13)
> UPDATE: Success
> *Jun 24 08:17:12.131: CSM_RX_CAS_EVENT_FROM_NEAT:(002F):
> EVENT_CALL_IDLE at slot 1 port 47 cause 200
> *Jun 24 08:17:12.131: (DNIS=, ANI=) at slot 1, port 47
> *Jun 24 08:17:12.131: CSM DSPLIB(1/47): np_dsplib_call_hangup reason 0
> *Jun 24 08:17:12.131: sigsm:(1/47):SIG_STATE_R2: sig_hangup API
> *Jun 24 08:17:12.131: sigsm:(1/47):SIG_STATE_IDLE: Received event
> 'SIG_EVENT_ENTERED'
> *Jun 24 08:17:12.131: CID = 155
> *Jun 24 08:17:12.131: NP Session Message Header:
> *Jun 24 08:17:12.131: msg length = 0x0003
> *Jun 24 08:17:12.131: session ID = 0x009B
> *Jun 24 08:17:12.131: msg tag = 0x1000
> *Jun 24 08:17:12.131: msg ID = 0xF103
> *Jun 24 08:17:12.131: SESSION STOP Command at 0x412E308C
> *Jun 24 08:17:12.131: Reason Code 0
> *Jun 24 08:17:12.131: np_ssm_session_stop():(1/47) Sending Command Msg
> *Jun 24 08:17:12.131: np_ssm_session_stop():: count=12
> 0000 00 03 00 9B 10 00 F1 03 00 00 00 00 ............
>
> *Jun 24 08:17:12.131: CID = 155
> *Jun 24 08:17:12.131: NP Session Message Header:
> *Jun 24 08:17:12.131: msg length = 0x0004
> *Jun 24 08:17:12.131: session ID = 0x009B
> *Jun 24 08:17:12.131: msg tag = 0x1000
> *Jun 24 08:17:12.131: msg ID = 0xF104
> *Jun 24 08:17:12.131: SESSION CHANGE SERVICE Command at 0x410357AC
> *Jun 24 08:17:12.131: template# = 255, load S-Reg = 1, Data Q ID = 0
> *Jun 24 08:17:12.131: svc_id: type = 0x1100, mode = 0x0000
> *Jun 24 08:17:12.131: np_ssm_session_change_service():: count=16
> 0000 00 04 00 9B 10 00 F1 04 11 00 00 00 00 01 FF
> 00 ................
>
> *Jun 24 08:17:12.131: CSM(1/47): Enter csm_enter_disconnecting_state
> *Jun 24 08:17:12.131: msg_to_calls_mgmt: msg type received
> *Jun 24 08:17:12.131: csm_call_prog_disc_reason - DATA
> *Jun 24 08:17:12.131: tty=0x6345E024 num=263 port=47 slot=1 shelf=0
> type=2 name=1/47 idb=0x6345C86C
> *Jun 24 08:17:12.131: np_ssm_session_stop_rsp():(1/47)
> *Jun 24 08:17:12.131: Session Stop Rsp result code = 0x0000
> *Jun 24 08:17:12.131: np_ssm_session_state_reached_ntf():(1/47)
> *Jun 24 08:17:12.131: svc_type = 0x1500 svc_mode = 0 session_state =
> FLUSHING
> *Jun 24 08:17:12.131: CSM DSPLIB(1/47):DSPLIB_IDLE: Signaling session
> transition to FLUSHING
> *Jun 24 08:17:12.131: np_ssm_session_state_reached_ntf():(1/47)
> *Jun 24 08:17:12.131: svc_type = 0x1500 svc_mode = 0 session_state =
> IDLE
> *Jun 24 08:17:12.131: CSM DSPLIB(1/47):DSPLIB_IDLE: Signaling session
> transition to IDLE
> *Jun 24 08:17:12.131: CSM DSPLIB(1/47): Modem went onhook
> *Jun 24 08:17:12.131: CSM_PROC_IC8_OC8_DISCONNECTING:
> CSM_EVENT_MODEM_ONHOOK at slot 1, port 47
> *Jun 24 08:17:12.131: CSM(1/47): Enter csm_enter_idle_state
> *Jun 24 08:17:12.131: csm_call_prog_disc_reason - DATA
> *Jun 24 08:17:12.131: tty=0x6345E024 num=263 port=47 slot=1 shelf=0
> type=2 name=1/47 idb=0x6345C86C
> *Jun 24 08:17:12.131: VDEV_DEALLOCATE: slot 1 and port 47 is deallocated
>
> *Jun 24 08:17:12.135: Response sent through Callback (Port 1/47)
> *Jun 24 08:17:12.147: np_ssm_session_setup_complete_rsp():NP_Address:
> slot 1 dfc 0 module 1 spe 255
> *Jun 24 08:17:12.147: msg length = 0x0016
> *Jun 24 08:17:12.147: session ID = 0x009B
> *Jun 24 08:17:12.147: msg tag = 0x1000
> *Jun 24 08:17:12.147: msg ID = 0xF180
> *Jun 24 08:17:12.147: np_ssm_session_setup_complete_rsp():(1/47)
> *Jun 24 08:17:12.147: (1/47)Setup Result code = 0x00
> *Jun 24 08:17:12.147: Setup TDM stream/channel = 0x00/0x11
> *Jun 24 08:17:12.147: np_ssm_update_vdev_tdm_info():(1/47) st= 1, ch= 17
> *Jun 24 08:17:12.147: np_ssm_session_state_reached_ntf():(1/47)
> *Jun 24 08:17:12.147: svc_type = 0x1100 svc_mode = 0 session_state =
> IDLE
> *Jun 24 08:17:12.147: CSM DSPLIB(1/47):DSPLIB_IDLE: Modem session
> transition to IDLE
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090708/b1242edb/attachment.html>
More information about the cisco-voip
mailing list