[cisco-voip] Mobile Voice Access

[Moataz Mamdouh]

Dial-peer voice
1000 pots

incoming
called-number 202

service ccm

no digit-strip

direct-inward-dial

 

dial-peer voice
2000 voip

destination-pattern
202

session target
ipv4: 192.168.1.100

codec g711ulaw

no vad



--- On Thu, 7/9/09, Moataz Mamdouh <moataz_mmdh at yahoo.com> wrote:

From: Moataz Mamdouh <moataz_mmdh at yahoo.com>
Subject: RE: [cisco-voip] Mobile Voice Access
To: "Bob Fronk" <bob at btrfronk.com>
Cc: "CISCO VOIP LIST" <cisco-voip at puck.nether.net>
Date: Thursday, July 9, 2009, 2:09 PM

Sample Dial Peer Configuration:


--- On Thu, 7/9/09, Bob Fronk <bob at btrfronk.com> wrote:

From: Bob Fronk <bob at btrfronk.com>
Subject: RE: [cisco-voip] Mobile Voice Access
To: "Moataz Mamdouh" <moataz_mmdh at yahoo.com>
Date: Thursday, July 9, 2009, 8:32 AM




 
 







I
have the two dial peers configured one for the incoming DID and one for the
destination. 

   

Do
you have a sample of the dial peers to see if I did them correctly? 

   

-- 

Bob 

   

   

   



From: Moataz Mamdouh
[mailto:moataz_mmdh at yahoo.com] 

Sent: Thursday, July 09, 2009 8:27 AM

To: Bob Fronk

Subject: Re: [cisco-voip] Mobile Voice Access 



   


 
  
  check the  2 dial-peer configuration

  one have to be matched with destination-pattern and the other must match
  using incoming called-number

  

  --- On Thu, 7/9/09, Bob Fronk <bob at btrfronk.com> wrote: 
  

  From: Bob Fronk <bob at btrfronk.com>

  Subject: Re: [cisco-voip] Mobile Voice Access

  To: "Moataz Mamdouh" <moataz_mmdh at yahoo.com>

  Date: Thursday, July 9, 2009, 6:20 AM 
  
  Yes, downloaded the XML and able to use show to see it on
  the router. I am not able to call the application internally. 
  Bob Fronk

  bob at btrfronk.com

  Sent from my Blackberry.

  

  Sent via Blackberry 
  
  
  
  From: Moataz Mamdouh 

  Date: Thu, 9 Jul 2009 03:23:14 -0400

  To: Bob Fronk<bob at btrfronk.com>

  Subject: Re: [cisco-voip] Mobile Voice Access 
  
   
    
    Did u
    download the Voice XML application from CCM?

    are you able to call the application and hear the script?

    

    --- On Wed, 7/8/09, Bob Fronk <bob at btrfronk.com> wrote: 
    

    From: Bob Fronk <bob at btrfronk.com>

    Subject: [cisco-voip] Mobile Voice Access

    To: "cisco-voip at puck.nether.net"
    <cisco-voip at puck.nether.net>

    Date: Wednesday, July 8, 2009, 3:59 PM 
    
    
    I have been struggling with setting up Mobile Voice Access.  If
    someone has this feature setup and working, I would appreciate a config
    sample. 
      
    Using UCM 6.1.2.1000-13 
      
    Incoming is PRI to VWIC2-1MFT-T1 in a 3825 router running 12.4(20)T1. 
      
    The setup is currently working for incoming / outgoing calls and we
    would like to add the Mobile Voice Access.   Mobile Connect is
    already configured and working. 
      
    Essentially, I have followed this article, but have had no luck
    getting this to work.  It is as if the number is not assigned. 
    We get “we’re sorry, the number you have called is not in service”. 
      
    http://edge.networkworld.com/community/comment/reply/32666/189184 
      
    I would appreciate any dial-peer configs that include a 10 digit DID
    number and any CUM config assistance. 
      
    Thanks for your help. 
      
    Bob 
      
      
      
      
    
    
    

    -----Inline Attachment Follows----- 
    
    _______________________________________________

    cisco-voip mailing list

    cisco-voip at puck.nether.net

    https://puck.nether.net/mailman/listinfo/cisco-voip 
    
    
   
  
  
  
 


   



 




      


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090709/597694ff/attachment.html>