[cisco-voip] Telco, New PRI Questions

[Jeff Ruttman]

Greetings,
 
One of our sites is changing from inbound trunks and DIDs and pots lines
to a PRI and our DIDs.  I got a call from Verizon and they asked me what
number I wanted on the PRI, and usually (They said.) that is the main
number of the business.  Well the main number out there is one of our
DIDs, and that can't be assigned to the PRI.
 
I don't care what number they put on the PRI, do I?  Is this right:  On
telco's side, they point our DIDs to whatever number is assigned to the
PRI, then Gateway\CCM et all route incoming calls from the PRI according
to the DID that the caller dialed.  So Verizon can assign any number
they want, right?
 
Thanks
jeff
CONFIDENTIALITY NOTICE: The information contained in this email including attachments is intended for the specific delivery to and use by the individual(s) to whom it is addressed, and includes information which should be considered as private and confidential. Any review, retransmission, dissemination, or taking of any action in reliance upon this information by anyone other than the intended recipient is prohibited. If you have received this message in error, please reply to the sender immediately and delete the original message and any copy of it from your computer system. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090713/b745dd2a/attachment.html>