[cisco-voip] Cisco CME On HOld Command

[Ahmad Riaz]

Dear Sir,
from where i  can find feature code.

Take Care   Ahmad Riaz Kazmi  Cell 0333-6367692
Ext # 4234
ICOM-LHR

--- On Mon, 7/13/09, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

From: Lelio Fulgenzi <lelio at uoguelph.ca>
Subject: Re: [cisco-voip] Cisco CME On HOld Command
To: "Ahmad Riaz" <lunaticark at yahoo.com>
Cc: cisco-voip at puck.nether.net
Date: Monday, July 13, 2009, 1:27 AM

#yiv242540949 p {margin:0;}If you have an analog phone attached to a VG224 or VG248 then there are feature codes you can program. 

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Ahmad Riaz" <lunaticark at yahoo.com>
To: cisco-voip at puck.nether.net
Sent: Monday, July 13, 2009 8:23:16 AM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] Cisco CME On HOld Command

Dear Sir,
 is their any command which hold an active call and without pressing hold button.

Take Care   Ahmad Riaz Kazmi  Cell 0333-6367692
Ext # 4234
ICOM-LHR



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090713/c5ed19f7/attachment.html>