[cisco-voip] How can i track trunk usage?

[Lelio Fulgenzi]

In 4.1, I go to CDR/CAR pages, then Device Reports > Gateways > Utilization 

Then I select the gateways and select the time. 

I think there is a service parameter or gateway parameter that says whether you have 23 or 24 channels per trunk. An error there could skew the reports slightly I think. 

I think there is a max of 10 or so per report. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Jonathan Madziarczyk" <JMad at cityofevanston.org> 
To: cisco-voip at puck.nether.net 
Sent: Wednesday, July 15, 2009 12:43:52 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] How can i track trunk usage? 




I’m trying to figure out our peak usage on some of our PRIs (MGCP, both ccm-to-pstn and ccm-to-pbx). Is there a way of using RTMT, CAR, or some other built-in (translation: free) service that can tell me what my max lines used at a given time are? 



JM 
_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090715/959c6c7f/attachment.html>