[cisco-voip] CallManager 7.1 TAPS with overlapping dial plan?

[Jason Aarons (US)]

CallManager 7.1(2a)

SiteA_Partition = 7911 DN1 = 1201(being used)

SiteB_Partition = 7911 DN1= 1201 (being used)

SiteC_Partition = 7911 DN1= 1201 (being deployed has BAT Dummy Address
ready for TAPS)

 

 

I have the phone Auto-Register with TAPS, go offhook, Press 1 for
English, then enter 1201.  I hear a error message that this phone number
is already registered.   I check the TAPS log file I see no errors.

 

The problem is TAPS see all the Partitions and thinks 1201 is in use.
If TAPS could ask for the Parition then maybe it could work.

 

Any thoughts or workarounds?

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090716/be349bca/attachment.html>