[cisco-voip] sccp ccm 10.10.90.21 identifier 1 priority 1 version X

[Ryan Ratliff]

The version parameter specifies the sccp version the dspfarm profile  
will use.  In your case I'd be very surprised it if registers and  
even more surprised if it worked after registering.  If your IOS  
doesn't have an option for the specific CUCM version you are running  
then you should pick the latest one.  If you then run into problems  
you may need to upgrade the IOS.

-Ryan

On Jul 16, 2009, at 9:20 PM, Jason Aarons (US) wrote:

Using CallManager 7.1(2a) I hit a bug in 12.4.24T1 and had to  
downgrade to 12.4.15T6.



In 12.4.24T1 I had;

sccp ccm 10.10.90.21 identifier 1 priority 1 version 7.0+



Once I downgrade to 12.4.15T6 I don’t have that option, seems to  
default to;

sccp ccm 10.10.90.21 identifier 1 priority 1 version 3.1



What is the ramification of using the wrong version?  Will this ever  
be auto-detect?  I have IOS Enhanced Conference Bridges in 2821s  
registering with CallManager at remote branch sites. Will using  
version 3.1 cause problems with 7.1(2a)?





Disclaimer: This e-mail communication and any attachments may contain  
confidential and privileged information and is for use by the  
designated addressee(s) named above only. If you are not the intended  
addressee, you are hereby notified that you have received this  
communication in error and that any use or reproduction of this email  
or its contents is strictly prohibited and may be unlawful. If you  
have received this communication in error, please notify us  
immediately by replying to this message and deleting it from your  
computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip