[cisco-voip] FW: associate end users with line appearance

[Fuermann, Jason]

I for one like to repeat the same step several times.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Chris Ward (chrward)
Sent: Friday, July 24, 2009 1:47 PM
To: Chris Ward (chrward); Jason Aarons (US); cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] FW: associate end users with line appearance

AND for Mobility and Phone Designer, you need to specify an "Owner ID" for a device. Yet again a separate operation from the previous two.

-Chris

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Chris Ward (chrward)
Sent: Friday, July 24, 2009 2:41 PM
To: Jason Aarons (US); cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] FW: associate end users with line appearance

No, they are entirely separate operations (Lines to users and users to lines) and have no bearing on each other.

Makes sense right? :)

-Chris

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Friday, July 24, 2009 2:07 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FW: associate end users with line appearance

Hey, I thought it associated lines to user for CCMUser ?  Does it not?

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Chris Ward (chrward)
Sent: Friday, July 24, 2009 12:51 PM
To: Eric Pedersen; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] associate end users with line appearance

It's for enabling presence for users per line. Required for CUP/CUPC.

P.S. This was also available in 6.1.2 (was added in 6.0.1)

-Chris

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Eric Pedersen
Sent: Friday, July 24, 2009 12:41 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] associate end users with line appearance

I upgraded from CM 6.1(2) to 7.1(2) and now I see that I can associate end users with a line appearance in the directory number configuration page.  Any idea what this does?

Thanks,
Eric
________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090724/e282f0ed/attachment.html>