[cisco-voip] DIDs direct to VM?

[Lelio Fulgenzi]

I second that. You can have multiple DNs on a CTI route point so grouping is easy. Just remember to change the total calls and busy trigger to something lower, like 5 and 5. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Chris Ward (chrward)" <chrward at cisco.com> 
To: "Jonathan Madziarczyk" <JMad at cityofevanston.org>, cisco-voip at puck.nether.net 
Sent: Tuesday, June 2, 2009 12:28:19 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] DIDs direct to VM? 




Use CTI Route Points and CFA them to VM. They do not use license units. 




-Chris 





From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Madziarczyk, Jonathan 
Sent: Tuesday, June 02, 2009 12:25 PM 
To: cisco-voip at puck.nether.net 
Subject: [cisco-voip] DIDs direct to VM? 



We’ve got a few inbound DIDs that go direct to VM (snow route hotlines, beach report lines, etc.) Up until now we’ve just been making dummy phones and adding the lines to them with a “forward all” to VM. 



Now that I’ve upgraded to 6.x from 4.x I have to keep track of my unit licenses so this is a bit tricker now and I’m trying to find a “right” way to do this. 



The lines don’t need to answered by a live person, I’m just not sure what Cisco’s solution for putting a line in the system that is not tied to a phone. 



Suggestions? 



JM 


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090602/bdb32fa9/attachment.html>