[cisco-voip] PBX-to-IPPBX calls

[Matthew Saskin]

No output from debugs sounds to me like the customer didn't term mon first

-matt

On 6/8/09, Ratko Dodevski <rade239 at gmail.com> wrote:
> Hi all;
> I asked the customer to do the debug voip ccapi inout, make some calls and
> send me the output. And he said that nothing came out. Does it need to be
> combined with something else, cos this sounds impossible. I'm thinking to
> delete all the dial peers and make only this two:
>
> dial-peer voice 1 pots
>  destination-pattern 38923141100
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  port 0/3/0:15
> !
> dial-peer voice 20 voip
>  destination-pattern .T
>  progress_ind setup enable 3
>  progress_ind alert enable 8
>  voice-class codec 1
>  session protocol sipv2
>  session target ipv4:62.220.200.50:5060
>  dtmf-relay rtp-nte h245-alphanumeric
>
> Dial-peer  1 is for incoming calls to the PBX, and all the others are sent
> to IPPBX via dial-peer 20.
>
> Suggestions???
>
> Regards
> Ratko
>


-- 
Matthew Saskin
msaskin at gmail.com
203-253-9571