[cisco-voip] Fax Server with remote offices

[Jason Aarons (US)]

XMedius Enterprise Edition with T38.  You would just add T38 dials peer
if using H323 pointing to XMedius Server.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Fried Michael
Sent: Monday, June 01, 2009 12:53 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Fax Server with remote offices

 

Hello,

We are looking to install a central fax server for the Americas region
in our office in Illinois, the problem is that many of our branch
offices have over 7 inbound fax lines.  So to get the faxes to the fax
server we can either us our IP network which then consumes 64k of
prioritized bandwidth per fax (a scarce resource) or forward back out
over the PSTN using 2 PRI channels for each fax!

Most branch offices already have routers for SRST so would it possible
to put a T.38 module in and send the faxes to the server using less
bandwidth?  Any other ideas?

Thank you all for the help!

Mike




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090609/bc3292bf/attachment.html>