[cisco-voip] 7915 + 7962G buttons program

[Scott Voll]

http://lmgtfy.com/?q=cisco+7915+supoorted+firmware
First one says minimum is 8.3.5.

Scott



On Wed, Jun 10, 2009 at 11:41 AM, Joe Halenkamp - JHH <JHH at djj.com> wrote:

>  *The Boot load the 7962 is using is* *(tnp 62.8-3-1 a.bin)*
>
> *I could not find anything regarding issues with this load.  Has anyone
> come across this issue?*
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Joe Halenkamp - JHH
> *Sent:* Wednesday, June 10, 2009 11:21 AM
> *To:* Scott Voll
>
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] 7915 + 7962G buttons program
>
>
>
> It is connected to a 7962 phone and is fairly new firmware.
>
>
>
> *From:* Scott Voll [mailto:svoll.voip at gmail.com]
> *Sent:* Wednesday, June 10, 2009 11:03 AM
> *To:* Joe Halenkamp - JHH
> *Cc:* Ahmad Alkam; cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] 7915 + 7962G buttons program
>
>
>
> what phone model?  I believe the 7915/16 have to be connected to 79x2/5
> series phones.  and they have to be running a faily new firmware (8.4 or
> better i believe).
>
>
>
> Hope that helps.
>
>
>
> Scott
>
> On Wed, Jun 10, 2009 at 6:28 AM, Joe Halenkamp - JHH <JHH at djj.com> wrote:
>
> I also have this issue with CCM 6.1(2).  The console acts as if it is
> coming up, but just displays the Cisco logo.
>
> In the Phone options, the system does allow me to configure speed dials to
> the template, but on reset still comes back showing the Cisco logo and
> nothing more.
>
> Another thing I had to do was Upload the module firmware and is showing in
> the Device Defaults with (B015-1-0-3), but with the Protocol not specified
> which concerns me.
>
>
>
> Any help??
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Scott Voll
> *Sent:* Tuesday, June 09, 2009 5:20 PM
> *To:* Ahmad Alkam
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] 7915 + 7962G buttons program
>
>
>
> on the phone device to you have module 1 selected as 7915?  then you will
> also need to make a button templete to get things on those buttons.
>
>
>
> Scott
>
> On Tue, Jun 9, 2009 at 2:00 PM, Ahmad Alkam <alkam.ahmad at yahoo.com> wrote:
>
> Hi.....
>
>
>
> I have 7915 expansion with 7962G I registered its on call manager 7.0 and i
> can not program the expansion buttons.
>
> please can any body tell me about it, thanks.
>
>
>
> Ahmad
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090610/81d99759/attachment.html>