[cisco-voip] E-911 setup ERL information

[Voice Noob]

 I thought the ALI information was what I sent to the PSAP. That is what I populate in emergency responder and export.

 

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Friday, June 12, 2009 11:08 AM
To: Voice Noob
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] E-911 setup ERL information

 

Be very careful. Again, Canada is different. But DIDs have no ALI information by default. You'll have to test this out.


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Voice Noob" <voicenoob at gmail.com>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
Cc: cisco-voip at puck.nether.net
Sent: Friday, June 12, 2009 12:05:09 PM GMT -05:00 US/Canada Eastern
Subject: RE: [cisco-voip] E-911 setup ERL information

I don’t think I need this PSALI you are talking about. I just need to send a different DID number outbound for each ERL. 

 

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Friday, June 12, 2009 10:01 AM
To: Voice Noob
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] E-911 setup ERL information

 

As far as I know, E911 information is given to the Telco, not the PSAP. The PSAP rarely wants to hear from you. Even testing is getting to be a bit of an issue in metropolitan areas.

You have to get a PSALI type service from your provider. This costs money and allows you to update the records for the DIDs you have purchased. In Canada anyways.

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Voice Noob" <voicenoob at gmail.com>
To: cisco-voip at puck.nether.net
Sent: Friday, June 12, 2009 10:10:49 AM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] E-911 setup ERL information



CUCM 7.x with Emergency Responder 7.x.  I have all of the translations and locations setup working correctly. My problem is with the local PSAP operator. The place I am setting up is a large campus but the local Telco did not offer PRI’s or CAMA trunks before this installation. This customer has enough clout locally to get the Telco to get the equipment so they can have PRI’s because they wanted to implement E-911 to the police even though there is no law requiring it yet.  Now when I try to export my location information the local PSAP administrator does not know what to do with it. He states that all of that is handled by AT&T at the MSAG. I don’t know what MSAG is but it sounds like that is where I need to go.  Does anyone know of a standard way to export the information that AT&T would accept. I think I have hit a brick wall locally. 

 

 


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090612/191b5907/attachment.html>