[cisco-voip] using Nagios to monitor MCS servers

Fuermann, Jason JBF005 at shsu.edu
Fri Jun 12 16:40:28 EDT 2009


Just a shot in the dark, but do you know around how many queries a minute is safe (more than zero I hope :))? We've been running SNMP and I haven't noticed any spikes in cpu, ect. Due to the polling.

From: Wes Sisk [mailto:wsisk at cisco.com]
Sent: Friday, June 12, 2009 11:37 AM
To: Fuermann, Jason
Cc: abuch; cisco voip
Subject: Re: [cisco-voip] using Nagios to monitor MCS servers

For our own CUOM product we've seen rapid repeated SNMP queries and AXL reads spike CPU and cause code yellow just as you fear.

In the specific case of Nagios it caused CSCsk46770 which is a PSIRT issue so limited information is available.


I am not recommending against this approach.  I am only recommending to take inventory of system health and behavior before and after implementation. We have repeatedly observed monitoring tools causing significant impact.

/Wes

On Friday, June 12, 2009 10:32:15 AM, Fuermann, Jason <JBF005 at shsu.edu><mailto:JBF005 at shsu.edu> wrote:

Would you mind elaborating on the issues? I wouldn't think snmp gets every few minutes would be that big an issue (at least compared to a single get). Of course, I could also see a single get spiking the cpu and causing a code yellow, I just wouldn't expect it. Just curious cause we are using snmp to monitor our cluster.

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Friday, June 12, 2009 9:09 AM
To: abuch
Cc: cisco voip
Subject: Re: [cisco-voip] using Nagios to monitor MCS servers

It is possible but I would caution you to take careful inventory of functionality and alarms before and after implementing nagios.  we have seen numerous service impacting issues caused by monitoring tools.

Regards,
Wes

On Friday, June 12, 2009 2:59:03 AM, abuch <abucho at gmail.com><mailto:abucho at gmail.com> wrote:


Dear,

What do you thinks of using Nagios to monitor performance utilization of Cisco MCS servers running windows 2003 like UCCX, WFO QM and Unity?

regards,
Abebe Amare
System Engineer, VivaCell









________________________________












_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

https://puck.nether.net/mailman/listinfo/cisco-voip




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090612/777b887e/attachment.html>


More information about the cisco-voip mailing list