[cisco-voip] Phones Ring but no voice? CME- to other Router

[Tim Smith]

Hi,

What are the FXO ports sitting in in the 2651. It does not have dedicated
onboard VIC slots.

Are they in a Network Module? Do you have PVDM's installed? a voice AIM?

This is going back a long time, and it was discussed here recently.

On 2600's I believe VWIC's work in WIC slots with the AIM module for DSPs.
But I dont think this will work for a dedicated VIC card.. I believe they
would have to sit in a voice NM on the side.

Cheers,

Tim

On Mon, Jun 15, 2009 at 9:36 PM, Robin Clayton <Robin.Clayton at rrca.org.uk>wrote:

>  Test Lab Setup is.
>
> 1760 with CME4 and 2 7940's
>
> Conected via ethernet to
>
> 2651 with 2 POTS on FXO's
>
>
> Call from 7940 to 7940 work fine
> Call from POTS to POTS work fine
>
> Previously with FXO in the 1760, 7940 to POTS worked fine.
>
> Now when I try to place a call between the CME router and the other
> router or vice versa, the phones ring as expected but then there is no voice
> between the phones.
>
> Has anyone got any ideas as I am realy scratching my head on this now and
> getting frustrated.
>
> Thanks
>
> Robin
>
> ===============================
> Robin Clayton
> Network Manager
> Tel: 01228822075
>
>
>
>
> *Richard Rose Central Academy *
> *Edgehill Road *
> *Carlisle *
> *Cumbria *
> *CA1 3SL *
>
> *Tel: 01228 822060 *
> *Fax: 01228 822061 *
>
> *http://www.richardroseacademies.org/*
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090617/9c8378f8/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 7338 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090617/9c8378f8/attachment.gif>