[cisco-voip] Blocking CLID via route pattern

[ccieid1ot]

The closest element to the device will take precedence.  If you set it
on the Gateway, everything will blocked from RG and back.

On Thu, Jun 18, 2009 at 8:01 AM, Leetun, Rob<rleetun at bouldercounty.org> wrote:
> Hi,
>
>
>
> Here is my question:
>
>
>
> "You will need to separate the ones you're controlling By route pattern
> versus the ones' you're controlling By route group".  I have separate route
> patterns for blocking and for non-blocking, but if I change the route list
> to 'off' then all the route patterns will be forced to block the CLID.
>
>
>
> Thanks.
>
>
>
>
>
> Cheers
>
>
>
> Rob
>
>
>
> Robert Leetun
>
> Network Engineer
>
> Boulder County Information Technology
>
> 2025 14th Street
>
> Boulder, CO 80302
>
> 303 441-3866 (W)
>
> 303 441-3983 (F)
>
> rleetun at bouldercounty.org
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>