[cisco-voip] Blind Transfer

[Voice Noob]

I have seen this option before on some very old systems. I think it was an
AT&T Merlin. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Tuesday, June 23, 2009 1:15 PM
To: gweissenfels at gmx.de
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Blind Transfer

Not really. The only feature to look back in time through the history of 
the call flow is the "Use Personal Preferences" option under Hunt 
Pilot.  That is a very unique scenario that unfortunately does not match 
your needs.

/Wes

On Tuesday, June 23, 2009 12:40:33 PM, gweissenfels at gmx.de wrote:
> Hello List!
>
> CUCM 7.0
>
>
> Scenario:
>
> Phone A calls Phone B. Phone B answers the call and does a blind transfer
to Phone C. But Phone C does not answer the call because the user is not at
his desk.
>
> Is it possible to route the call back to Phone B after a certain amount of
time? Else the call is lost, if there is no forward to voicemail on Phone C.
>
> Thank you in advance!
>
> Gregor
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip