[cisco-voip] Debug Sub flow UCCX

[Turpin, Mark]

http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_not
e09186a00802788ae.shtml

 

--

MARK TURPIN  |  Systems Engineer  |  CCIE 21649 |  Insight Networking |
www.insight.com

Single Number Reach: +1-314-656-2315   f. +1-314-656-2355
mark.turpin at insight.com <mailto:mark.turpin at insight.com>  

 

The information contained in this message and any attachment may contain
privileged or confidential information protected from disclosure. If you
are not the intended recipient, or an employee or agent responsible for
delivering this message to the intended recipient, you are hereby
notified that any review, dissemination, distribution or copying of this
information is strictly prohibited.  If you have received this
transmission in error, please notify the sender immediately by replying
to this message and destroying the original and all copies.  Thank you.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
Sent: Friday, June 26, 2009 8:52 AM
To: cisco-voip at puck.nether.net; ask-icd-ivr-support at external.cisco.com
Subject: [cisco-voip] Debug Sub flow UCCX

 

How can I debug the sub flow that the main script is calling within UCCX
7.x? 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090626/1d7faa69/attachment.html>