[cisco-voip] In CallManager 7.1 can you BAT the FXO/FXS ports on a EVM-HD ?

Kris Seraphine baryonyx5 at gmail.com
Sat Jun 27 09:20:17 EDT 2009


The 7.1 release notes do not mention this under the new/changed feature
sections so I'd assume not.

On Fri, Jun 26, 2009 at 11:30 AM, Jason Aarons (US) <
jason.aarons at us.didata.com> wrote:

>  In CallManager 7.1 can you BAT the FXO/FXS ports on a EVM-HD ?
>
>
>
> Sorry I don’t have access to CCMAdmin or a test box -jason
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090627/8463fd51/attachment.html>


More information about the cisco-voip mailing list