[cisco-voip] SURL to 7941 button using BAT?

Countryman, Edward Edward.Countryman at provena.org
Tue Jun 30 12:46:32 EDT 2009


thank you for the response.

 

Not clear on how the UDP will update the actual phone device.  Could you
possibly spell this out a bit more, I apologize for being dense but I
just don't see it.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Hennigh, Elexis
Sent: Monday, June 29, 2009 5:40 PM
To: Jason Burns
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SURL to 7941 button using BAT?

 

When you subscribe to the service and configure the SURL button on the
UDP template it will subscribe and configure that button on any UDP ran
against the template. I have done this rather often lately. Be careful
though...if you have to run the BAT again for whatever reason be sure to
remove the SURLs because it will subscribe to the service again and
again if you let it. LOL! Removing several subscribed services to a bulk
of UDPs is a pain! Haven't discovered how to unsubscribe with the BAT. J

 

Elexis Hennigh

System Engineer

Oklahoma State University

007a Cordell North

Stillwater, OK 74078

(405) 744-3137

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Countryman,
Edward
Sent: Sunday, June 28, 2009 9:50 AM
To: Jason Burns
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SURL to 7941 button using BAT?

 

CCM 6.1.3

 

I see options to change button template but don't see a way to propagate
the actual button SURL across a group of phones, just DN updates

From: Jason Burns [mailto:burns.jason at gmail.com] 
Sent: Thursday, June 25, 2009 5:29 PM
To: Countryman, Edward
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SURL to 7941 button using BAT?

 

What version of CUCM are you using? It's available under Update Device,
Insert Device and, Insert User Device Profile, but the Service URL
behavior has been changing a lot between versions.



On Thu, Jun 25, 2009 at 12:32 PM, Countryman, Edward
<Edward.Countryman at provena.org> wrote:

I need to add the same SURL to the second button on 300+ of my 7941
phones.  The devices already have the correct button template but I am
hoping to not have to do them all one at a time

Anyone know if it's possible to add a SURL to a phone SURL-button using
BAT?  I don't see it. Thoughts?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.12.94/2208 - Release Date:
06/29/09 14:43:00

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090630/dadd35c1/attachment.html>


More information about the cisco-voip mailing list