[cisco-voip] Local Route Groups without DID

[Chris Ward]

How about setting the external phone number mask on all the phones to the
external number you want people to call back in on? Then on the single route
pattern or local route group you can specify to use the external phone
number mask?

Chris Ward 


From: Damien Ball <balld at gcs.k12.nc.us>
Date: Fri, 1 May 2009 10:52:26 -0400 (EDT)
To: Chris Ward <chrward at cisco.com>
Cc: <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Local Route Groups without DID

Yeah, I don't think that will work.  From what I understand of local route
groups, you can take advantage of having a single route list and a single
set of route patterns.  You define which route group to use in the device
pool (this is specific to call manager 7).  So, if i set the masking on the
pattern, I still have the same problem of not being able to set multiple
masks for different groups of phones easily.  The only way I can see to do
it is to set a mask on each individual phone.  I don't want to do that.  If
this doesn't pan out, I'll have to go back to the traditional way of doing
route groups.  Any other suggestions?


----- Original Message -----
From: "Chris Ward" <chrward at cisco.com>
To: "Damien Ball" <balld at gcs.k12.nc.us>, cisco-voip at puck.nether.net
Sent: Friday, May 1, 2009 10:44:48 AM GMT -05:00 US/Canada Eastern
Subject: Re: [cisco-voip] Local Route Groups without DID

Re: [cisco-voip] Local Route Groups without DID Hi Damien,

It sounds like you want to be masking the calling party at the route pattern
level with no modification at the route list level. I think I might not be
understanding you exact scenario and goal, but that¹s what it sounds like.

Chris Ward 


From: Damien Ball <balld at gcs.k12.nc.us>
Date: Fri, 1 May 2009 10:15:10 -0400 (EDT)
To: <cisco-voip at puck.nether.net>
Subject: [cisco-voip] Local Route Groups without DID

I'm looking at using local route groups with my call system.  I am currently
masking the calling party information at the Route List.  The reason for
this is that I'm not mapping DIDs to individual phones, but I have all calls
from a specific site masked as one telephone number (which dials back into
the receptionist or UC call handler).  If i'm using one global route list,
is there a way to preserve this configuration or is it a lost cause?  I'm
using Call manager 7.0.2 and Unity Connection 7.0.2.  I am routing these
calls through 2 PRIs (each in different calling areas with different
providers).




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090501/aeab34b1/attachment.html>