[cisco-voip] "The Call Cannot Completed as Dialed"

[Dennis Heim]

Or CallManager has decided you need to reset your route list.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Peter Slow
Sent: Tuesday, May 05, 2009 3:53 PM
To: Anthony Kouloglou
Cc: cisco voip
Subject: Re: [cisco-voip] "The Call Cannot Completed as Dialed"

Here are the things that Callmanager (ANN, really.) is capable of saying to you. If the wording doesnt match exactly, it's not callmanager. If it does, You are probably listening to a message from the IPVMSApp Annunciator.

The format of the following info is:
Condition:
Annuncement:

An equal or higher precedence call is in progress. MLPP Only Equal or higher precedence calls have prevented the completion of your call. Please hang up and try again. This is a recording.

A precedence access limitation exists.  MLPP Only Precedence access limitation has prevented the completion of your call. Please hang up and try again. This is a recording.

Someone attempted an unauthorized precedence level. MLPP or “not authorized” on Route Pattern The precedence used is not authorized for your line. Please use an authorized precedence or ask your operator for assistance. This is a recording.

The call appears busy, or the administrator did not configure the directory number for call waiting or preemption.
The number you have dialed is busy and not equipped for call waiting or preemption. Please hang up and try again. This is a recording.

The system cannot complete the call.
Your call cannot be completed as dialed. Please consult your directory and call again or ask your operator for assistance. This is a recording.

A service interruption occurred.
A service disruption has prevented the completion of your call. In case of emergency call your operator. This is a recording.

This info is from the 6.1 SRND.

-Pete

On Tue, May 5, 2009 at 3:18 PM, Anthony Kouloglou <akoul at dataways.gr> wrote:
> No Telco,
> it is from the cisco Anunciator.
> The call is not routed to a voice gateway.
> It is trying to call a local extension.
>
> Thanks
> Anthony
>
> Paul wrote:
>
> Call me crazy but I'd swear that's a message from the telco.
>
>
>
>
> ________________________________
> From: Anthony Kouloglou <akoul at dataways.gr>
> To: cisco voip <cisco-voip at puck.nether.net>
> Sent: Tuesday, May 5, 2009 3:11:58 PM
> Subject: [cisco-voip] "The Call Cannot Completed as Dialed"
>
> I am getting this message when: phone A calls phone B and vice versa 
> (suddenly today after 1 year that it has been working!!)
>
> phone A in the hub location
> phone B in a location with 500kbps BW to hub
>
> Phone A can access the web page of B and ping it.
> B is normally registered to the same publisher CUCM!!
> B is behind a router that does not do NAT or firewalling.
>
> Why is this prompt playing?
> I resunched the location BW but i guess that is not the issue.
> What debugging could show  me what is wrong?
>
> Thanks and Kind Regards
> Anthony
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>