[cisco-voip] How to Configure Site Codes

[gin Murray]

Hi All

Thanks for your excellent help. The site code are working.

I am planning to use *30 to *59 as a Site code for the Sites. Do you think
that it will break any CCM Features from working.

On Wed, May 6, 2009 at 6:31 AM, Michael Back <Michael.Back at nisd.net> wrote:

> We do this in our organizations using translation patterns.  Assign the
> patterns to a common partition, then assign a CSS to each translation
> pattern pointing to the appropriate partition.
>
> MB
>
> >>> Scott Voll <svoll.voip at gmail.com> 5/5/2009 5:29 PM >>>
>  Very easily done via a translation rule via a partition.
>
> Scott
>
> On Tue, May 5, 2009 at 2:30 PM, gin Murray <kinusca at gmail.com> wrote:
>
> > Hi
> >
> > I have a centralized CCM with remote sites having their Own Gateway
> and
> > Different Partitions.
> >
> > I want to assign a site-code to each of teh sites, so that we can
> take care
> > of the Overlapping extension numbering Plan.
> >
> > Site A to dial Site B will dial *30 followed by SiteB's extnsion No
> >  Site A to dial Site C will dial *31 followed by SiteC's extnsion No
> >  Site C to dial Site B will dial *32 followed by SiteB's extnsion No
> >  Site C to dial Site A will dial *33 followed by SiteA's extnsion No
> >
> > I Donot have a gatekeeper, can someone please help me.
> >
> > Thnaks in advance.
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090506/ee71da94/attachment.html>