[cisco-voip] How to Configure Site Codes

[Scott Voll]

really doubt it if your using a * but I guess I don't know your setup.  DNA
should be able to doubt check ya.
Scott

On Wed, May 6, 2009 at 11:39 PM, gin Murray <kinusca at gmail.com> wrote:

> Hi All
>
> Thanks for your excellent help. The site code are working.
>
> I am planning to use *30 to *59 as a Site code for the Sites. Do you think
> that it will break any CCM Features from working.
>
> On Wed, May 6, 2009 at 6:31 AM, Michael Back <Michael.Back at nisd.net>wrote:
>
>> We do this in our organizations using translation patterns.  Assign the
>> patterns to a common partition, then assign a CSS to each translation
>> pattern pointing to the appropriate partition.
>>
>> MB
>>
>> >>> Scott Voll <svoll.voip at gmail.com> 5/5/2009 5:29 PM >>>
>>  Very easily done via a translation rule via a partition.
>>
>> Scott
>>
>> On Tue, May 5, 2009 at 2:30 PM, gin Murray <kinusca at gmail.com> wrote:
>>
>> > Hi
>> >
>> > I have a centralized CCM with remote sites having their Own Gateway
>> and
>> > Different Partitions.
>> >
>> > I want to assign a site-code to each of teh sites, so that we can
>> take care
>> > of the Overlapping extension numbering Plan.
>> >
>> > Site A to dial Site B will dial *30 followed by SiteB's extnsion No
>> >  Site A to dial Site C will dial *31 followed by SiteC's extnsion No
>> >  Site C to dial Site B will dial *32 followed by SiteB's extnsion No
>> >  Site C to dial Site A will dial *33 followed by SiteA's extnsion No
>> >
>> > I Donot have a gatekeeper, can someone please help me.
>> >
>> > Thnaks in advance.
>> >
>> > _______________________________________________
>> > cisco-voip mailing list
>> > cisco-voip at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/cisco-voip
>> >
>> >
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090508/663324c1/attachment.html>