[cisco-voip] CUCM 7 under VMWare

[Tim Smith]

Hey Guys,

I did 2 x CUCM 7 installs in VMware the other day. I usually used 72GB for
the other versions. But I decided to use 36GB and pre-allocate the disk
space to see if it ran quicker afterwards.

Both did install fine, but then I had strange problems. They were actually
working for a while, then all of a sudden no CCMAdmin access.

I went back to my 72GB :) and they are both happy now, no problems at all.

Cheers,

Tim



On Fri, May 8, 2009 at 11:03 PM, Philip Walenta <pwalenta at wi.rr.com> wrote:

>  The odd thing is...I did an initial CUCM 7 install with 36GB and it
> worked perfectly.  It just decided to eat itself the other day so I'm
> starting it again.
>
> Will try with 80GB and see what happens.
>
> (I'd still like to find some way to clean it off).
>
>  ------------------------------
> *From:* Chris Ward (chrward) [mailto:chrward at cisco.com]
> *Sent:* Friday, May 08, 2009 8:02 AM
> *To:* Philip Walenta; cisco-voip at puck.nether.net
> *Subject:* RE: [cisco-voip] CUCM 7 under VMWare
>
>  Samll correction…
>
>
>
> I don’t think we “block” upgrades with less than 80GB, but I do remember
> them failing in CUCM 7. Perhaps something changed.
>
>
>
> -Chris
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Chris Ward (chrward)
> *Sent:* Friday, May 08, 2009 9:00 AM
> *To:* Philip Walenta; cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CUCM 7 under VMWare
>
>
>
> Hi Phillip,
>
>
>
> It sounds like you didn’t create a big enough HDD. I believe the
> requirement is 80 although I thought we blocked the install in VMWare if the
> HDD wasn’t big enough. I believe the size should be 80GB. I believe this
> works out to 2x 20GB active/inactive and a roughly 40GB common(logging)
> partition.
>
>
>
> 9GB does not sound like enough for a common partition hence, I think you
> need to specify a larger HDD size and re-install.
>
>
>
> -Chris
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Philip Walenta
> *Sent:* Friday, May 08, 2009 8:55 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] CUCM 7 under VMWare
>
>
>
> I just starting building a CUCM 7 system under VMWare.
>
>
>
> It builds fine however it has one major issue.
>
>
>
> The logging partition (all 9GB of it) is full.
>
>
>
> Anyone run into this before?
>
>
>
> How can I clear out this partition?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090509/a42083bc/attachment.html>