[cisco-voip] Increase the output volume on Cisco ATA186

[Dana Tong (AU)]

Hi all,

I have an ATA 186 connected to a paging system but the output volume is very low. I've connected to the web configuration via http://x.x.x.x/dev and tried many values in the FxsOutputLevel (or volume?) field and reset the ATA but it doesn't seem increase the output going to the PA.

Does anyone know definitively what values would give the loudest output? I think it will take from -9 to 2.
Would adjusting the input level have any affect?

Cheers
Dana



******************************************************************************
 - NOTICE FROM DIMENSION DATA AUSTRALIA
This message is confidential, and may contain proprietary or legally privileged information.  If you have received this email in error, please notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and any attachments for viruses.  Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.
******************************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090512/ad632f73/attachment.html>