[cisco-voip] Duplicate Extensions' MailBox

[Duy Nguyen]

Setup VM profile with differnet site codes.  For site code 1 VM profile starts with 01xxx and and site code 2 02xxx.

gin Murray <kinusca at gmail.com> wrote:

>Lets say the extension is 1234 in parttion A with Sitecode *30 and 1234 in
>Parttion b with Sitecode *31,
>
>In that case teh VM extension will be *301234 for 1st extension and *311234
>for the 2nd extension?
>
>Will you be passing 7 digits between the unity and CCM.
>
>On Tue, May 12, 2009 at 5:23 AM, Michael Back <Michael.Back at nisd.net> wrote:
>
>> We accomplish this with site codes.  The site code plus the four digit
>> extension makes a seven digit unity extension.  You can then create a
>> voice mail profile that adds the code to the extension, 123XXXX.  I
>> don't know if there is a simpler way to accomplish this, but we reuse
>> extensions a lot, so this seems to work well for us.
>>
>> MB
>>
>> >>> gin Murray <kinusca at gmail.com> 5/12/2009 2:02 AM >>>
>>  Hi
>>
>> We have got two extensions with the same No in different parttitons,
>> how do
>> I create the voice mail box for these estension.
>>
>> For example:
>>
>> Lets say i have extension 1212 in Parttion A and extension 1212 in
>> Partition
>> B, in CCM 4.2(3)Sr4b , the extension 1212 in partiton A already has a
>> mailbox, how do I create a Mailbox for extension 1212 in partition B.
>>
>> I am using Unity 4.0
>>
>> Thanks for your help in advance.
>>
>> Gin
>>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip