[cisco-voip] Fwd: Phones on VGE cannot dial Out

[Matthew Loraditch]

I'm not sure that's right his VG is controlled by MGCP which means it would be the CSS on each port in CM that would control what it can or can't dial



Matthew Loraditch
1965 Greenspring Drive

Timonium, MD 21093
support at heliontechnologies.com<https://mail.heliontechnologies.com/owa/redir.aspx?C=b58c3a3022854f19bb35fdf6a8dc6974&URL=mailto%3asupport%40heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<https://mail.heliontechnologies.com/owa/redir.aspx?C=b58c3a3022854f19bb35fdf6a8dc6974&URL=http%3a%2f%2fwww.heliontechnologies.com>
Support Issue? Email support at heliontechnologies.com<https://mail.heliontechnologies.com/owa/redir.aspx?C=b58c3a3022854f19bb35fdf6a8dc6974&URL=mailto%3asupport%40heliontechnologies.com> for fast assistance!

________________________________
From: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi [lelio at uoguelph.ca]
Sent: Wednesday, May 13, 2009 7:48 PM
To: gin Murray
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Fwd: Phones on VGE cannot dial Out

I could be wrong, but I suspect you can't make any calls because there are no outbound dialpeers defined. You'll need to create a dial-peer to point back to your callmanager at a minimum.

I'm not dialpeer expert, but you'll want to do something like this:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080094852.shtml


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "gin Murray" <kinusca at gmail.com>
To: cisco-voip at puck.nether.net
Sent: Wednesday, May 13, 2009 7:17:48 PM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] Fwd:  Phones on VGE cannot dial Out



---------- Forwarded message ----------
From: gin Murray <kinusca at gmail.com<mailto:kinusca at gmail.com>>
Date: Wed, May 13, 2009 at 3:32 PM
Subject: Re: [cisco-voip] Phones on VGE cannot dial Out
To: Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>>


Oh I am sorry,

Protocol is MGCP.. and teh config of the VG224 is :

version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname
!
boot-start-marker
boot-end-marker
!
enable secret
!
no aaa new-model
!
resource policy
!
!
!
!
!
voice-card 0
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0

 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
!
ip http server
!
!
!
control-plane
!
!
voice-port 2/0
!
voice-port 2/1
!
voice-port 2/2
!
voice-port 2/3
!
voice-port 2/4
!
voice-port 2/5
!
voice-port 2/6
!
voice-port 2/7
!
voice-port 2/8
!
voice-port 2/9
!
voice-port 2/10
!
voice-port 2/11
!
voice-port 2/12
!
voice-port 2/13
!
voice-port 2/14
!
voice-port 2/15
!
voice-port 2/16
!
voice-port 2/17
!
voice-port 2/18
!
voice-port 2/19
!
voice-port 2/20
!
voice-port 2/21
!
voice-port 2/22
!
voice-port 2/23
!
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server
ccm-manager config
ccm-manager config dialpeer-prefix
!
mgcp
mgcp call-agent  service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
no mgcp explicit hookstate
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface FastEthernet0/0
mgcp bind media source-interface FastEthernet0/0
!
mgcp profile default
!
!
!
dial-peer voice 1 pots
 service mgcpapp
 port 2/4
!
dial-peer voice 99920 pots
 service mgcpapp
 port 2/0
!
dial-peer voice 99921 pots
 service mgcpapp
 port 2/1
!
dial-peer voice 99922 pots
 service mgcpapp
 port 2/2
!
dial-peer voice 99923 pots
 service mgcpapp
 port 2/3
!
dial-peer voice 99924 pots
 service mgcpapp
 port 2/4
!
dial-peer voice 99925 pots
 service mgcpapp
 port 2/5
!
dial-peer voice 99926 pots
 service mgcpapp
 port 2/6
!
dial-peer voice 99927 pots
 service mgcpapp
 port 2/7
!
dial-peer voice 99928 pots
 service mgcpapp
 port 2/8
!
dial-peer voice 99929 pots
 service mgcpapp
 port 2/9
!
dial-peer voice 999210 pots
 service mgcpapp
 port 2/10
!
dial-peer voice 999211 pots
 service mgcpapp
 port 2/11
!
dial-peer voice 999212 pots
 service mgcpapp
 port 2/12
!
dial-peer voice 999213 pots
 service mgcpapp
 port 2/13
!
dial-peer voice 999214 pots
 service mgcpapp
 port 2/14
!
dial-peer voice 999215 pots
 service mgcpapp
 port 2/15
!
dial-peer voice 999216 pots
 service mgcpapp
 port 2/16
!
dial-peer voice 999218 pots
 service mgcpapp
 port 2/18
!
dial-peer voice 999217 pots
 service mgcpapp
 port 2/17
!
dial-peer voice 999219 pots
 service mgcpapp
 port 2/19
!
dial-peer voice 999221 pots
 service mgcpapp
 port 2/21
!
dial-peer voice 999222 pots
 service mgcpapp
 port 2/22
!
dial-peer voice 999220 pots
 service mgcpapp
 port 2/20
!
!
!
line con 0
line aux 0
line vty 0 4
 password
 login




On Wed, May 13, 2009 at 3:26 PM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:
Gin, I this has been mentioned before. We need more information!

protocol? MGCP? H323? SCCP?

A small snippit of code is ok with a reasonable explanation, but the whole running config might be better if you don't know alot about the systems yet.



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt



----- Original Message -----
From: "gin Murray" <kinusca at gmail.com<mailto:kinusca at gmail.com>>
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Wednesday, May 13, 2009 6:17:54 PM GMT -05:00 US/Canada Eastern
Subject: Re: [cisco-voip] Phones on VGE cannot dial Out

How people can dial to the analog phones and it is working..

On Wed, May 13, 2009 at 3:08 PM, gin Murray <kinusca at gmail.com<mailto:kinusca at gmail.com>> wrote:
Hi,

i have connected Analog phones to the VGE 224 and the Phones are not able to dial out. When It goes off-hook the user gets a busy tone.

Port config:

!
voice-port 2/0
!

However incoming calls are working!




_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip



_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090513/76a8c888/attachment.html>