[cisco-voip] LDAP & CUCM Integration

[Ryan Ratliff]

What attribute did you map to UserID in the lap configuration?  If  
you picked something like TelephoneNumber make sure that attribute is  
set.

Otherwise the packet capture will tell you what attributes we are  
requesting for and what attributes AD is returning.

-Ryan

On May 14, 2009, at 1:21 PM, svr.file at gmail.com wrote:

I have a done a trace on the DirSync and sounds the follow but not  
sure what it means: Missing LDAP attribute: Attribute Count=3 ?

As far as I can see all the User Fields To Be Synchronized are  
correct, does this refer to something else?

Thanks.


2009/5/15 Ryan Ratliff <rratliff at cisco.com>
Take a packet capture at your AD server and look for ldap traffic.   
You can also look at the DirSync traces on the CUCM publisher.  Also  
be sure the DirSync service is activated and running.

-Ryan


On May 14, 2009, at 11:39 AM, svr.file at gmail.com wrote:

I'm having some issues getting a Windows 2000 Server, SP4, LDAP  
server to integrate with CUCM7.

I have created a dedicated user account in AD for the integration,  
enabled LDAP System server type MS AD with the User ID  
sAMAccountName. I have configure LDAP Directory with the user account  
that I created in AD and the LDAP User Search Base with the following  
format: OU=<the OU that the end user accounts are  
in>,DC=testlab,DC=local.

The problem is that no users are imported when I run the perform the  
full sycn?

Can anyone help with this problem.

Thanks.
_______________________________________________
cisco-voip mailing list

cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip